Reference Guide

Troubleshooting / Printing and Copying Problems

The Stylus Photo RX600 Does Not Print

All lights are off
Lights came on and then went out
Only the LCD panel is on
The ! Error light is on

All lights are off

Try one or more of these solutions:

Turn off the Stylus Photo RX600 and make sure that the power cord is securely plugged in.

Make sure that your outlet works and is not controlled by a wall switch or timer.

The Stylus Photo RX600's voltage may not match the outlet rating. Turn it off and unplug it immediately. Then, check the Stylus Photo RX600's labels.

Caution:

If the voltage does not match, DO NOT PLUG YOUR PRODUCT BACK IN. Contact your dealer.

Try one or more of these solutions:

Turn off the Stylus Photo RX600 and computer. Make sure that the interface cable is securely plugged in.

Turn off the Stylus Photo RX600 and disconnect the USB cable from your computer, then print an operation check page. See Running a printer operation check.

If the check page prints correctly, make sure that the printer software and your application are installed correctly.

If you are trying to print a large image, your computer may not have enough memory to print. Try printing a smaller image.

Windows Me and 98 users clear any stalled print jobs from the Spool Manager. See Using EPSON Spool Manager.

If the Stylus Photo RX600 sounds like it is trying to print, but is unable to, run the Head Cleaning utility. See Cleaning the Print Head

If this does not work, replace the ink cartridges. See Replacing an Ink Cartridge.

Try one or more of these solutions:

Check EPSON Status Monitor 3 (Windows) or EPSON StatusMonitor (Macintosh) to find the cause of the error.

Check the error messages on the LCD panel. For details of the error messages, see Error messages.