|
Printing method
|
On-demand ink jet
|
|
Nozzle configuration
|
Black: 48 nozzles
Color: 45 nozzles (15 each: cyan, magenta, yellow)
|
|
Print direction
|
Bidirectional with logic seeking
|
|
Input buffer
|
12KB
|
Note: Poor quality paper may reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade paper.
Do not load curled or folded paper.
Avoid extremes in temperature or humidity when printing. Optimum printing temperature ranges from 12 to 25°C (55 to 77°F), and optimum humidity ranges from 40 to 60% RH.
Store EPSON Self-Adhesive Sheets under the following conditions: 15 to 30°C (59 to 86°F), and 20 to 60% RH.
|
Size
|
Letter (8,5 × 11 inches [216 × 280 mm])
4 × 6 inches (101 × 152 mm)
Panoramic (8.3 x 23.4 inches)
A4 (210 × 297 mm [8,3 × 11,7 inches])
|
|
Paper types
|
Special paper distributed by EPSON
|
|
Size
|
A6 (A6 (104 × 147 mm [4,1 × 5,8 inches) with 16 frames
|
|
Paper types
|
Special paper distributed by EPSON
|
|
Minimum top margin (A)
|
3,0 mm (0,12 inch)
|
|
Minimum left margin (B-L)
|
3,0 mm (0,12 inch)
|
|
Minimum right margin (B-R)
|
3,0 mm (0,12 inch)
|
|
Minimum bottom margin (C)
|
12,5 mm (0,49 inch)
|
Note: You can extend the minimum bottom margin to 3 mm (0,12") using the Minimize Margins feature, however print quality may decline in the expanded area. Before printing large jobs using an extended margin setting, print a single sheet to confirm printout quality.
* The figure given is based on continuous printing after ink replacement. The actual print capacity may vary.
** Ink thaws and is usable after approximately 3 hours at 25°C (77°F).
Caution: To ensure good results, use genuine EPSON cartridges and do not refill them. Other products may cause damage to your printer not covered by EPSON's warranties.
Don't use an ink cartridge if the date on the package has expired.
Note: Check the label on the back of the printer for your printer's voltage.
Note: Stored in shipping container.