Reference Guide

Index Search Glossary Contents Help

Product Information / Safety Instructions

A Few Precautions

When using the Stylus Scan
When handling the ink cartridges
When choosing a place for the Stylus Scan

When using the Stylus Scan

• Do not put your hand inside the Stylus Scan or touch the ink cartridges during operation.

• Do not move the print head by hand. Doing so may damage the Stylus Scan.

• Always use the power button to turn off the Stylus Scan. When this button is pressed, the Operate light flashes briefly then goes off. Do not unplug the Stylus Scan or turn off the power to the outlet until the Operate light stops flashing. The scanner carriage must be secured with the Transportation Lock.

• Before transporting the Stylus Scan, make sure the print head is in the home (far right) position and the ink cartridges are in place. The scanner carriage must be secured with the Transportation Lock.

[Top]

When handling the ink cartridges

• Keep ink cartridges out of the reach of children. Do not allow children to drink the ink or otherwise handle the cartridges.

• If ink gets on your skin, wash it off with soap and water. If ink gets into your eyes, flush your eyes immediately with water. If a discomfort or vision problems remain after a thorough flushing, see a doctor immediately.

• Do not shake the ink cartridges. Cartridges may leak if shaken.

• Install the ink cartridge immediately after you remove it from its package. Leaving the cartridge unpacked for a long time before use may result in reduced print quality.

• Once you install an ink cartridge, do not open the clamp or remove the cartridge except to replace it with a new one. The cartridge becomes unusable when you open the clamp.

• Do not use an ink cartridge beyond the date printed on the cartridge carton. For best results, use the ink cartridges completely within six months of installing them.

• Do not dismantle the ink cartridges or try to refill them. Doing so may damage the print head.

[Top]

When choosing a place for the Stylus Scan

• Place the Stylus Scan on a flat, stable surface that extends beyond the base of the machine in all directions. The Stylus Scan will not operate properly if it is tilted or at an angle.

• Avoid places subject to rapid changes in temperature and humidity. Also keep the Stylus Scan away from direct sunlight, strong light, and heat sources.

• Avoid places subject to shocks and vibrations.

• Leave enough room around the Stylus Scan to allow for sufficient ventilation.

• Place the Stylus Scan near a wall outlet where the power cord can be easily unplugged.

Note for French-speaking users:

Placez l'imprimante près d'une prise de contacte où la fiche peut être débranchée facilement.

[Top]

Previous

Next