You can copy
both sides of an ID card on one sheet of paper.
Load
plain paper in one of these sizes: Letter (8.5 × 11
inches [216 × 279 mm]) or A4
(8.3 × 11.7 inches
[210 × 297 mm]).
Note: Load only
the recommended number of sheets.
Press
the Copy
button. You see this screen:
To print
more than one copy, press the up or down arrow buttons to select
the number (up to 99).
Press
the Menu
button, press the up or down arrow buttons to select Layout, and press the OK button.
Press
the up or down arrow buttons to select ID
Card Copy and press the OK button.
To
change the paper size setting, press the up or down arrow buttons
to select Paper Size, press the
OK button, press the up
or down arrow buttons to select your paper size, and press the
OK button
again.
When you
are ready to copy, press the Start button. You see instructions
on the LCD screen.
Place
your ID card facedown on the scanner glass.
Press
the Start button again. Your product
scans the front side of the card.
When
your product finishes scanning the front side, turn the card over,
then press the Start button again. Your product
scans the back side of the card and then begins printing.
Note: To cancel
printing, press the Stop/Reset button.