If the projected image is fuzzy or blurry, try the
following solutions:
Adjust the
image focus.
Clean the
projector lens.
Note: To avoid
condensation on the lens after bringing the projector in from a
cold environment, let the projector warm up to room temperature
before using it.
Position
the projector close enough to the screen, and directly in front of
it.
Position
the projector so the keystone adjustment angle is not so wide that
it distorts the image.
Adjust the
Sharpness setting to improve image
quality.
If you are
projecting from a computer, press the Auto button on the remote control to
automatically adjust the tracking and sync. If any bands or overall
blurriness remain, display a uniformly patterned image on the
screen and manually adjust the Tracking and Sync
settings.
Set the
Lens Type setting to the correct
lens in the Extended menu.
If you are
projecting from a computer, use a lower resolution.
Turn off any keystone correction and disable the Quick Corner setting.