Selections on the status display menus let you view information about the projector and its operation.
Status Information menu
| Selection | Options | Description |
|---|---|---|
| System | — | See the System status information table at the end of this topic |
| Source | Computer
BNC Video S-Video HDMI DVI-D SDI LAN HDBaseT |
Displays the source currently being used |
| On-Screen Display | On
Off |
Displays the settings for the On-Screen Display. When set to Off, the menus or messages are not displayed on the projected images |
| Shutter | Open
Close |
Displays the projector's shutter function status |
| Air Temp | — | Displays the environmental temperature |
| AC Voltage | — | Displays the power voltage |
| Lamp1 Type | Standard
Portrait |
Display the lamp type for
each lamp
Standard: a standard lamp is installed Portrait: a portrait mode lamp is installed |
| Lamp2 Type | Standard
Portrait |
|
| Lamp1 Status | On
Off |
Displays the operating status of Lamp 1 |
| Lamp2 Status | On
Off |
Displays the operating status of Lamp 2 |
| Lamp Select | Dual
Single Lamp1 Lamp2 |
Displays the lamp option currently selected
Dual: both lamps are selected Single: a single lamp is selected Lamp1: only Lamp1 is selected Lamp2: only Lamp2 is selected |
Source menu
| Selection | Options | Description |
|---|---|---|
| Source | Computer
BNC Video S-Video HDMI DVI-D SDI LAN HDBaseT |
Displays the source currently being used |
| Resolution | — | Displays the resolution of the current input signal |
| Video Signal | — | Displays the current input video signal |
| Color Space | — | Displays the color space of the current input signal |
| H-Frequency | — | Displays the horizontal frequency of the current input signal |
| V-Frequency | — | Displays the vertical frequency of the current input signal |
| Sync Polarity | — | Displays the Sync polarity |
| Sync Mode | — | Displays the Sync type |
| Detected Mode | — | Displays the detected mode of the current input signal |
| Video Level | Auto (Normal)
Auto (Expanded) Normal Expanded |
Displays the video level of the projector |
Signal Information menu
| Selection | Options | Description |
|---|---|---|
| 5V Detect | — | Displays the detection results of 5V signals |
| TMDS Clock | — | Displays the TMDS frequency of the current input signal |
| TMDS H-Frequency | — | Displays the horizontal frequency of the current input signal |
| TMDS V-Frequency | — | Displays the vertical frequency of the current input signal |
| DetChg 5CFHMP123 | — | Displays the factors of signal changes |
| Stable Time | — | Displays the amount of operating time since the input source was determined |
| HDCP Status | Non-HDCP
Passed Failed |
Displays the HDCP status |
| HDCP Ri | — | Display information about each HDCP type |
| HDCP AKSV | — | |
| HDCP An | — | |
| AVI Info VIC | — | Displays the VIC information (AVI) of the current input signal |
| AVI InfoChecksum | OK
NG |
Displays the checksum result for AVI |
| Signal Mode | HDMI
DVI |
Displays the signal mode |
| Pixel Encoding | RGB
YUV4:4:4 YUV4:2:2 YUV4:2:0 |
Displays the color space information (AVI) of the current input signal |
| HDBaseT Quality | — | Displays the image signal information from the HDBaseT port |
Network Wired menu
| Selection | Options | Description |
|---|---|---|
| Projector Name | — | Displays the name used to identify the projector when connected to a network |
| Connection Mode | HDBaseT
LAN |
Displays the connection path for the LAN |
| DHCP | — | Displays the DHCP display settings |
| IP Display | — | Displays the IP address display settings |
| IP Address | — | Displays the IP address |
| MAC Address | — | Displays the MAC address |
Network Wireless menu
| Selection | Options | Description |
|---|---|---|
| Projector Name | — | Displays the name used to identify the projector when connected to a network |
| Connection Mode | Quick
Advanced |
Displays the connection mode to use when connecting the projector and a computer over a wireless LAN |
| SSID Display | — | Displays the SSID display settings |
| IP Display | — | Displays the IP address display settings |
| SSID | — | Displays the SSID |
| IP Address | — | Displays the IP address |
| DHCP | — | Displays the DHCP settings |
| MAC Address | — | Displays the MAC address |
| Security | No
WPA2-PSK WPA/WPA2-PSK |
Displays the security settings |
| Antenna Level | Level 0-5 | Displays the reception status for Wi-Fi |
Maintenance menu
| Selection | Description |
|---|---|
| Operation Time | Displays the projector's total operation time |
| Lamp1 Op. Time | Displays the total operation time of standard Lamp 1 |
| Lamp2 Op. Time | Displays the total operation time of standard Lamp 2 |
| Lamp1 Op. Time PR | Displays the total operation time of portrait mode Lamp 1 |
| Lamp2 Op. Time PR | Displays the total operation time of portrait mode Lamp 2 |
Version menu
| Selection | Description |
|---|---|
| Serial No. | Displays the projector's serial number |
| Main | Displays the projector's firmware version information |
| Video | |
| Status Monitor |
Setting menu
| Selection | Options | Description |
|---|---|---|
| Contrast | Level | Adjusts the contrast for the LCD screen |
| Lighting Time | Off
10 to 60 sec Approx. 30 min |
Selects the duration of time for the status screen display |
System status information
| Status | Description |
|---|---|
| OK | The projector is in normal operating mode |
| Warm-up | The projector is warming up |
| Standby | The projector is in standby mode |
| Cool Down | The projector is cooling down |
| Temp Error | A high temperature error occurred |
| Fan Error | A fan error occurred |
| Sensor Error | A sensor error occurred |
| Lamp1 Error (S) | An error occurred in Lamp 1
S: indicates a standard lamp P: indicates a Portrait mode lamp |
| Lamp1 Error (P) | |
| Lamp2 Error (S) | An error occurred in Lamp 2
S: indicates a standard lamp P: indicates a Portrait mode lamp |
| Lamp2 Error (P) | |
| Lamp1 Failure (S) | A Lamp 1 failure occurred
S: indicates a standard lamp P: indicates a Portrait mode lamp |
| Lamp1 Failure (P) | |
| Lamp2 Failure (S) | A Lamp 2 failure occurred
S: indicates a standard lamp P: indicates a Portrait mode lamp |
| Lamp2 Failure (P) | |
| Power1 Error | A power error occurred |
| Power2 Error | |
| Internal Error | An internal error occurred |
| Cinema Filter Err | A cinema filter error occurred |
| Auto Iris Error | An auto iris error occurred |
| Airflow Error | A filter airflow error occurred |
| Shutter Error | A shutter error occurred |
| Pump Error | A system cooling error occurred |
| Temp Warning | A high temperature warning occurred |
| Internal Warning | A warning regarding the internal system occurred |
| Airflow Decline | A low airflow error occurred |
| Lamp1 Warning (S) | A lamp warning occurred in the indicated Standard or Portrait mode Lamp 1 or Lamp 2 |
| Lamp1 Warning (P) | |
| Lamp2 Warning (S) | |
| Lamp2 Warning (P) | |
| Power1 Warning | A power warning occurred |
| Power2 Warning | |
| Shutter Warning | A shutter warning occurred |
| Direction Warning | The usage angle is out of range. Check the lamp type and set it at the correct angle |
| Lamp Mismatch | A lamp type mismatch occurred; use the same type of lamp (Standard or Portrait mode) for both Lamp 1 and Lamp 2 |
| Clean Filter | An air filter notice occurred; clean the air filter |