If the projected image is fuzzy or blurry, try the
following solutions:
Adjust the
image focus.
Clean the
projector lens.
Note: To
avoid condensation on the lens after bringing the projector in from
a cold environment, let the projector warm up to room temperature
before using it.
Try
connecting the projector to the highest quality connection
available on your input source. For example, connect to an HMDI
port or component video ports for a better quality input
signal.
Position
the projector close enough to the screen.
Position
the projector so the keystone adjustment angle is not so wide that
it distorts the image.
Adjust the
Sharpness setting to improve
image quality.
If
you are projecting from a computer, press the Auto button on the remote control to
automatically adjust the tracking and sync. If any bands or
overall blurriness remain, display a uniformly patterned image on
the screen and manually adjust the Tracking and Sync settings.
If you are
projecting from a computer, try using a lower resolution or try to
match the projector's native resolution.