Selecting an Image Source

If you connected multiple image sources to the projector, such as a computer and DVD player, you may want to switch from one image source to the other.
Note: If you turned on the Auto Source Search setting in the Operation menu, the projector automatically switches to another detected image source if the signal to the current image source is lost.
  1. Make sure the connected image source you want to use is turned on.
  2. For video image sources, insert a DVD or other video media and press its play button, if necessary.
  3. Do one of the following:
    • Press the Source Search button on the projector or remote control until you see the image from the source you want.


    • Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to cycle through the sources.


      1 HDMI, Video, and HDBaseT (BrightLink 1485Fi) sources
      2 VGA port sources
      3 USB port sources (computer display or external devices)
      4 Network and Screen Mirroring sources
    • Press the button for the HDMI source you want on the control pad (BrightLink 1485Fi).


    • Press the  Home button on the remote control or projector and select your image source.


      Note: Your Home screen may look different from the illustration shown here.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use