Blue |
Blue |
Off |
Off |
Normal operation. |
Blue |
Flashing blue |
Off |
Off |
Warming up. Wait for an image to appear. |
Shutting down. (When the Status light stops flashing,
you can unplug the projector.) |
Blue |
Off |
Off |
Off |
In standby, sleep mode, or monitoring. |
Flashing blue |
Off |
Off |
Off |
Preparing for monitoring or quick startup mode; all
features are disabled. |
Flashing blue |
Varies |
Varies |
Flashing orange |
Projector is too hot.
- Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
- Clean or
replace the air filter.
- Make sure
the environmental temperature is not too hot.
|
Off |
Flashing blue |
Off |
Orange |
Projector has overheated and turned off. Leave it
turned off to cool down. After about five minutes, do the
following:
- Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
- Make sure the environmental temperature is not too
hot.
- Clean or
replace the air filter.
- If
operating the projector at high altitude, turn on High Altitude Mode.
- If the
problem persists, unplug the projector and contact Epson for
help.
|
Flashing blue |
Varies |
Flashing orange |
Varies |
Laser warning. Turn the projector off, unplug it, and
contact Epson for help. |
Off |
Flashing blue |
Orange |
Off |
Laser has a problem. Turn the projector off, unplug
it, and contact Epson for help. |
Off |
Flashing blue |
Off |
Flashing orange |
A fan or sensor has a problem. Turn the projector
off, unplug it, and contact Epson for help. |
Off |
Flashing blue |
Flashing orange |
Off |
Internal projector error. Turn the projector off,
unplug it, and contact Epson for help. |
Varies |
Flashing blue |
Flashing orange |
Varies |
Refresh Mode is in progress. |
Varies |
Varies |
Fast flashing orange |
Fast flashing orange |
The batch setup file is corrupt or the USB flash
drive is connected incorrectly. Disconnect the USB flash drive and
turn off the projector. Unplug the projector, plug it in again, and
try again. |
Fast flashing blue |
Fast flashing blue |
Fast flashing orange |
Fast flashing orange |
Writing the menu settings has failed and an error in
the projector's firmware has occurred. Turn the projector off,
unplug it, and contact Epson for help. |