Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:
  • Press the Source Search button and wait a few seconds for an image to appear.
  • Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary.
  • Check the connection from the projector to your video sources.
  • If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
  • If necessary, turn the projector and the connected computer or video source off and then on again.
  • If you are projecting from an HDMI source, change the HDMI EQ Setting setting in the projector's Signal I/O menu.
  • If you are projecting using a thumb-sized media streaming device, set the HDMI EQ Setting to 1 in the projector's Signal I/O menu.
  • If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.
  • Connect the video source directly to the projector.
  • Try a different video cable.
  • If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use