If only a partial computer image appears, try the
following solutions:
- Check the Blanking
setting in the Settings menu.
- Select a different image aspect mode in the Signal
menu.
- Check your
computer display settings to disable dual display and set the
resolution within the projector's limits. (See your computer manual
for details.)
- Check the
resolution assigned to your presentation files to see if they are
created for a different resolution than you are projecting in. (See
your software help for details.)
- Make sure you selected the correct Projection setting.
- Try adjusting the image position using the
Image Shift setting in the
Settings menu.
- If you are passing the video signal through another
device, make sure the device is set up correctly, then try
connecting the video source directly to the projector.
- If you are viewing a 3D image, make sure you
selected the correct 3D format.
- If the other solutions do not solve the problem,
reset all of the projector settings using the options on the
Reset menu.