Using Frame Interpolation

You can use the projector's Frame Interpolation feature to smooth fast-moving video by comparing consecutive image frames and inserting an intermediate image frame between them.

You cannot use this feature in any of the following conditions:

You are using the E-Zoom feature
The image signal exceeds WUXGA
You turned on the 4K Enhancement, Edge Blending, or Scale settings

You cannot use this feature in any of the following conditions:

The input signal exceeds 1920 in horizontal resolution
You selected V-Zoom as the Aspect setting
You turned on the 4K Enhancement, Edge Blending or Scale settings
You selected Off as the Image Preset Mode setting

Press the Menu button. You see a screen like this:
Select the Image Enhancement setting and press Enter.
Select the Frame Interpolation setting and press Enter. You see a screen like this:
Select the level of interpolation and press Enter.
When you are finished, press the Menu button.

Note: If your resulting images contain noise, turn off the Frame Interpolation setting. You can also select the Noise Reduction setting from the Image Enhancement menu.