Image Quality Settings - Image Menu

Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source.



Setting Options Description
Color Mode See the list of available Color Modes Adjusts the vividness of image colors for various image types and environments
Light Output 50% (ECO) to 100% (Normal) Adjusts laser brightness
Brightness Brightness Lightens or darkens the overall image
Contrast Adjusts the difference between light and dark areas in the image
Scene Adaptive Gamma Adjusts the gamma depending on the displayed scene
Gamma Adjusts the coloring in the image
Dynamic Contrast Adjusts the projected luminance based on the image brightness. Select Off, Normal, or High Speed.
Color Color Saturation Adjusts the color intensity of the image
Tint Adjusts the balance of green to magenta tones in the image
White Balance Color Temp.: sets the color temperature according to the selected color mode; lower values tint the image red, and higher values tint the image blue

Customized: adjusts the individual RGB components of the offset and gain

RGBCMY Adjusts the hue, saturation, and brightness for each individual color
Sharpness Sharpness Adjusts the sharpness or softness of image details
Noise Reduction Reduces flickering in analog images
MPEG Noise Reduction Reduces noise or artifacts in MPEG videos
Detail Enhancement Creates a more textured image
Video Range Auto

Limited (16–235)

Full (0–255)

Sets the video range to match the setting of the device connected to the HDMI port
Reset Resets all Image menu settings to their defaults
Note: The Brightness setting does not affect laser brightness. To change the laser brightness, adjust the Light Output setting.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use