Loading Paper in Cassette 1 (Upper Cassette)

You can load photo paper and other media in these sizes in the upper cassette:
Note: Do not remove or insert the paper cassette while the product is operating.
  1. Close the output tray by selecting Output Tray on the Home screen, if necessary.
  2. Open the front cover.


  3. Pull out the upper cassette (labeled 1 on the cassette).


    Note: If the cassette is too far inside the product to reach, turn the product off and on again to reset the cassette's position.
  4. Slide the edge guides out.


  5. Insert paper in the cassette with the glossy or printable side facedown.


    Note: Make sure the paper does not extend beyond the triangle symbol at the rear edge of the cassette.


  6. Slide the side edge guides against the paper, but not too tightly.


    Note: Make sure the paper fits under the tabs on the edge guides.
  7. Keeping the cassette flat, slide it into your product.


    Note: If you slide the cassette too far into the product, turn the product off and on again. The cassette moves to the correct position.
  8. Select the size and type of the paper you loaded on the LCD screen, and select Close.
    Note: You can quickly select frequently used paper settings by selecting Favorite Paper Settings.
    Keep the front cover open so the output tray can automatically extend after you send a print job. After printing, select Output Tray on the Home screen to close the output tray.
Always follow these paper loading guidelines:
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use