Printer error. Turn on the printer again. See your
documentation for more details. |
Turn the product off and then back on again. If the
error persists, check for and remove any jammed paper or protective
materials from the product. If the error still persists, contact
Epson for support.
If you see any of the following error codes, make sure
you have not exceeded the loading capacity for any paper
source:
|
Paper out in XX. |
Load the size and type of paper in the paper source
indicated. |
Too many paper cassette units are installed. Turn the
power off and uninstall the extra units. See your documentation for
details. |
You can use up to three optional paper cassettes.
Remove any extra units. |
Unsupported paper cassettes are installed. Turn the
power off and uninstall the extra units. See your documentation for
details. |
Remove the unsupported paper cassettes by reversing the
installation instructions. |
Cannot print because XX is out of order. You can print
from another cassette. |
Turn the product off and then back on again. Reinsert
the indicated paper cassette. If the error persists, contact Epson
for support. |
The pickup roller in XX has reached the end of its
service life. |
Replace the pickup roller, then reset the roller
counter for that cassette. |
You need to replace Ink Supply Unit(s). |
Replace the indicated ink packs. |
Paper Setup Auto Display is set to Off. Some features
may not be available. For details, see your documentation. |
AirPrint is not available when the Paper Setup Auto Display setting is disabled.
Change Paper Setup Auto Display
to On. |
The combination of the IP address and the subnet mask
is invalid. See your documentation for more details. |
Contact your product administrator. |
To use cloud services, update the root certificate from
the Epson Web Config utility. |
Contact your product administrator. |
Check that the printer driver is installed on the
computer and that the port settings for the printer are
correct. |
Make sure the printer port is selected correctly in
Property > Port from the Printer menu. Select the
USBXXX setting for a USB
connection or EpsonNet Print Port
for a network connection. |
Recovery mode
Update Firmware |
Contact your product administrator. |