Reference Guide

Index Help Safety Contents Glossary

Maintenance

Cleaning This Product

To keep the CX1500 operating at its best, clean it thoroughly several times a year.

Make sure the CX1500 is turned off (all its lights should be off). Then unplug the power cord.

Remove all paper from the sheet feeder.

Use a soft brush to carefully clean away all dust and dirt.

If the outer case or the inside of the sheet feeder is dirty, clean it with a soft, clean cloth dampened with mild detergent. Keep the document and scanner unit closed to prevent moisture from getting inside.

If the document table is dirty, open the document cover. Then clean the glass with a soft, dry cloth, or with a blower brush.

If ink gets on the inside of the CX1500, wipe it away with a damp cloth.

Warning:

Be careful not to touch the internal gears.

Caution:

Never use alcohols or thinners to clean the CX1500; these chemicals can damage the components as well as the case.

Be careful to keep water away from the printing and scanning mechanisms and electronic components.

Do not use a hard or abrasive brush.

Do not spray the inside of the CX1500 with lubricants; unsuitable oils can damage the mechanisms. Contact your a qualified service person if lubrication is needed. See Contacting Customer Support.

[Top]