Reference Guide
 |
 |
Index | |
 |
|
Help | |
 |
|
Safety |
|
||||||||||
 |
|
Contents | |
 |
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||
The Control Panel
Maintenance mode setting procedure
This section describes how to enter the maintenance mode and make settings with the buttons on the control panel.
To make the maintenance mode settings, follow the steps below.
 | Note: |
|
|
|
|
 |
Enter the maintenance mode. Make sure that the printer is turned off. While pressing and holding the Pause  button, press the Power  button to turn on the printer.
|
 |
Select an item. Press the Paper Feed  button or Paper Feed  button to select a desired item.
|
 |
Set the item. Press the Menu  button to enter the selected item. The first parameter is displayed on the LCD.
|
 |
Select a parameter. Press the Paper Feed button or Paper Feed button to select a parameter for the item.
|
 |
Set the parameter. Press the Enter  button to store the selected parameter. If the parameter is used for execution only, press the Enter button to execute the function for the item.
|
| | Note: |
| |
|
 |
Exit the maintenance mode. Press the Power button to turn off the printer, and then turn it on again.
|
|
Item |
First parameters |
Second parameters |
|
|
EXECUTE |
|
|
ENGLISH, FRENCH, ITALIAN, GERMAN, PORTUGUE, SPANISH, DUTCH |
- |
|
|
OFF, ROLL |
- |
|
|
METER, FEET/INCH |
- |
|
|
0% - 150% |
- |
|
|
EXECUTE |
- |
|
|
ON, OFF |
- |
|
|
EXECUTE |
- |
|
|
LIGHT LIGHT BLACK |
MANUFACTURE, COLOR, INK TYPE, INK CAPACITY, INK LEVEL, PRODUCTION DATE, EXPIRATION DATE, INK LIFE, INK AGE |
Data received from the host computer can be printed out in hexadecimal numbers.
To print out the data, follow the steps below.
|
| Make sure that paper is loaded in the printer. |
|
|
While in the maintenance mode, press the Paper Feed button or Paper Feed button to display HEX DUMP.
|
|
|
Press the Menu button to display PRINT, and then press the Enter button again to start printing.
|
The print data in the print buffer is printed with 16-byte hex. data in the left column and corresponding ASCII characters in the right column.
| Note: |
|
|
You can select the language to be displayed on the LCD.
To select a suitable language, follow the steps below.
|
|
While in the maintenance mode, press the Paper Feed button or Paper Feed button to display LANGUAGE, and then press the Menu button.
|
|
|
Press the Paper Feed button or Paper Feed button to select a suitable language.
|
|
|
Press the Enter button to set the language. Make sure that READY (or similar word in the language selected) appears on the LCD.
|
| Note: |
|
|
You can select the paper remaining counter function. When this function is on, ROLL PAPER COUNTER appears on the PRINTER SETUP menu.
|
|
While in the maintenance mode, press the Paper Feed button or Paper Feed button to display REMAINING PPR SETUP, and then press the Menu button.
|
|
|
Press the Paper Feed button or Paper Feed button to select a suitable function.
|
|
|
Press the Enter button.
|
You can select a unit of measurement to use to display length. To select a unit, follow the steps below.
|
|
While in the maintenance mode, press the Paper Feed button or Paper Feed button to display UNIT, and then press the Menu button.
|
|
|
Press the Paper Feed button or Paper Feed button to select a suitable unit.
|
|
|
Press the Enter button to set the unit.
|
You can select a cutting pressure.
You can perform ultrasonic head cleaning.
You can save roll paper by not feeding paper after the power is on.
You can set all setting values you made in the Menu mode to their factory set value.
For maintenance service person only
 Previous |
| Version 1.00E, Copyright © 2003, SEIKO EPSON CORPORATION |
button to return to the previous step.
