For using your printer with a PC
For using your printer with a Macintosh
To use your printer, you need Microsoft® Windows® 95, Windows® 98, Windows® NT 4.0.
Your computer should also meet the following system requirements:
Minimum system
|
Recommended system
|
i486/25 MHz for Windows 95 and NT 4.0 i486/66 MHz for Windows 98
|
Pentium II 300 MHz or higher processor
|
16MB RAM
|
128MB RAM or more
|
10MB hard disk space for Windows 95 and 98 20MB for Windows NT 4.0
|
1.2GB or more free disk space
|
VGA monitor
|
VGA or better monitor
|
Your computer dealer can help you update your system if it does not meet these requirements.
[Top]
To use this printer, your Apple® Macintosh® must meet the following system requirements. You also need a standard Apple System Peripheral-8 cable (8-pin mini-circular connector) or equivalent.
Your computer should also meet the following system requirements:
Minimum system
|
Recommended system
|
PowerPC
|
PowerPC 604e 300 MHz or higher processor
|
System 7.5.1
|
System 7.6 or later
|
14MB of available memory 23MB of available memory when background printing is turned on.
|
25MB or more of available memory 40MB of available memory when background printing is turned on.
|
 |
Note:
|
 | -
The amount of available memory varies according to the number and kind of applications that are open. To see how much memory is available, choose About This Macintosh from the Apple menu and refer to the memory size (listed in kilobytes) under "Largest Unused Block" (1,024K=1MB).
|
 | -
The memory requirements above are for printing on B0 (1030 mm x 1456 mm) size paper. These requirements may vary depending on the size of the paper, the type of application you are using, and the complexity of the document you want to print.
|
In addition to these system and memory requirements, you also need 10MB of free hard disk space to install your printer software. To print, you need extra hard disk space amounting to about double the size of the file you want to print.
[Top]
|