If your printouts are grainy or unclear, try these
solutions:
- Clean the
suction cap.
- Run a nozzle
check to see if any of the print head nozzles are clogged. Then
clean the print head, if necessary.
- Align the
print head.
- Clean the
surface of the T-shirt. Remove any lint with sticky tape or a lint
roller, and press the fibers flat with a hard roller when you load
a T-shirt on the platen.
- You may need
to increase the image resolution or print at a smaller size
(optimum image resolution is 360 dpi); see your software
documentation for instructions.
- For colored
prints on white T-shirts, try using Ink
Blot Reduction mode in the Garment Creator software. (This
mode is not applicable when White ink is used.)