Cleaning the Print Head Using the Product Control Panel

You can clean the print head using the control panel on your product.
  1. Load a few sheets of plain paper in the product.
  2. Press the  home icon, if necessary.
  3. Select Maintenance. You see a screen like this:


  4. Select Print Head Cleaning. You see a screen like this:


  5. Select Start to clean the print head. When the cleaning cycle is finished, you see a message on the screen.
    Caution:
    Never turn off the product or open the front cover during a cleaning cycle or you may not be able to print.
  6. Select Check.
  7. Select Print to print a nozzle check pattern and confirm that the print head is clean.
If you don’t see any improvement after cleaning the print head up to 2 times, wait at least 6 hours without printing. Then try cleaning the print head again. If quality still does not improve, contact Epson.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use