Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:
  • Press the Auto button on the remote control to optimize the image signal.
  • Make sure you selected the correct Screen Type setting for the screen you are using.
  • Make sure the Scale setting in the Extended menu is turned off.
  • Try adjusting the image position using the Position setting in the Signal menu.
  • Press the Aspect button on the remote control to select a different image aspect ratio.
  • Check the Blanking setting in the Signal menu.
  • Check the cables connecting the computer or video source to the projector. Try connecting different cables.
  • Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.)
  • Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.)
  • Make sure you selected the correct Projection setting in the Extended menu.
  • If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use