Solutions When the Image is Not Rectangular

If the projected image is not evenly rectangular, try the following solutions:
  • If the projector is not mounted on the wall or ceiling, place it directly in front of the screen, lining up the lens with the center of the screen, if possible.
  • Use the Image Shift setting to adjust the image position, rather than moving the projector.
  • Press the keystone buttons on the projector to adjust the image shape.
  • Adjust the image shape using the individual Geometry Correction settings in the Installation menu.
    Note: Adjusting Quick Corner, H/V-Keystone, and Arc Correction settings may affect focus and pen calibration.
    Note: If the projector is mounted on the wall, always use the adjustment dials on the mount to center the image.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use