Blue |
Blue |
Off |
Off |
Normal operation |
Blue |
Off |
Off |
Off |
Standby or sleep mode (with USB Power in Standby set to On; otherwise no lights are lit) |
Blue |
Flashing blue |
Off |
Off |
Warming up. Wait for about 30 seconds for an image to
appear. All buttons are disabled. |
Cooling down or shutting down. All buttons are
disabled. |
Flashing blue |
Off |
Off |
Off |
The projector is preparing to enter USB Power in
Standby mode |
Off |
Flashing blue |
Flashing orange |
Off |
Internal projector error. Turn the projector off,
unplug it, and contact Epson for help. |
Off |
Flashing blue |
Off |
Flashing orange |
A fan or sensor has a problem. Turn the projector off,
unplug it, and contact Epson for help. |
Off |
Flashing blue |
Off |
Orange |
Projector has overheated and turned off. Leave it
turned off to cool down. After about five minutes, do the
following:
- Make sure that the vents are not clogged with dust
or obstructed by nearby objects.
- Clean or replace the air filter.
- If operating the projector at high altitude, turn on
High Altitude Mode.
- If the problem persists, unplug the projector and
contact Epson for help.
|
Off |
Flashing blue |
Orange |
Off |
Laser has a problem.
- Make sure that the vents are not clogged with dust
or obstructed by nearby objects.
- If the problem persists, unplug the projector and
contact Epson for help.
|
Blue |
Varies |
Varies |
Flashing orange |
Projector is too hot.
- Make sure that the vents and air filter are not
clogged with dust or obstructed by nearby objects.
- Clean or replace the air filter.
- Make sure the environmental temperature is not too
hot.
- If the problem persists, unplug the projector and
contact Epson for help.
|
Flashing blue |
Varies |
Flashing orange |
Varies |
Laser warning. Turn the projector off, unplug it, and
contact Epson for help. |