If the projected image contains electronic interference (noise) or static, try the following solutions:
Check the cables connecting your computer or video source to the projector. They should be:
Separated from the power cord to prevent interference
Securely connected at both ends
Not connected to an extension cable
Check the settings in the projector's Signal menu to make sure they match the video source.
If available for your video source, adjust the Deinterlacing and Noise Reduction settings in the projector's Image menu.
Image >
Image Enhancement
>
Noise Reduction
Image >
Image Enhancement
>
Deinterlacing
Select a computer video resolution and refresh rate that are compatible with the projector.
If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting in the projector's Image menu to improve image quality.
If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.
If you are using the USB Display function, turn off the Transfer layered window setting in the Epson USB Display Settings program on your computer.
Related Links