|
|
|
|||||||||||||||||||||||||||||||||
Problem Solver / Other Problems
Paper does not feed properly
| Cause | What to do |
| The paper guides are not set correctly. | Make sure that the paper guides in all the paper cassettes are set in the correct paper size positions. |
| The paper source setting may not be correct. | Make sure that you have selected the correct paper source in your application. |
| There may be no paper in the cassettes. | Load paper into the selected paper source. |
| The size of loaded paper differs from the control panel setting. | Make sure that the correct paper size is set in MP Tray Size or LC1 Size settings in the Tray Menu in the Setup menu's Printer Settings. |
| Too many sheets may be loaded in the MP tray or paper cassettes. | Make sure that you have not tried to load too many sheets of paper. For the maximum paper capacity for each paper source, see Loading Paper. |
| The paper that is loaded is curled. | Straighten the paper. |
|
If paper does not feed from the optional paper cassette unit, the unit may not be installed properly. |
For instructions on installing the unit, see Optional Paper Cassette Unit. |
 Previous |
 Next |
| Version 1.00E, Copyright © 2003, SEIKO EPSON CORPORATION |
