Installation Settings - Installation Menu

Settings on the Installation menu let you set up your projector for your installation environment. The available settings depend on the currently selected input source and other settings.

Setting Options Description
Fixed Installation On


Set to On if you installed the projector in a fixed location
Test Pattern Displays a test pattern to assist in focusing and zooming the image and correcting image shape
Projection Front




Selects the way the projector faces the screen so the image is oriented correctly
Geometry Correction H/V-Keystone

Quick Corner

Arc Correction

Point Correction


Adjusts image shape to rectangular (horizontally and vertically)

H/V-Keystone: lets you manually correct horizontal and vertical sides and balance (the H-Balance and V-Balance settings are not available for the PowerLite EB-L520U)

Quick Corner: select to correct image shape and alignment using an on-screen display

Arc Correction: select to adjust the curve or arc of the horizontal and vertical sides

Point Correction: select to divide the projected image into a grid and correct distortion by moving a selected point

Memory: controls memory functions for current image shape settings
  • Save Memory: saves the current image shape as a memory setting
  • Load Memory: loads a saved image shape memory
  • Rename Memory: renames a saved image shape memory
  • Erase Memory: deletes a saved image shape memory
  • Reset Memory: resets all the image shape memory settings
Digital Zoom (PowerLite EB-L630SU/EB-L635SU) Varying levels available Adjusts the size of the projected image
E-Zoom (PowerLite EB-L520U) Varying levels available Adjusts the size of the projected image
Image Shift (PowerLite EB-L630SU/EB-L635SU) Varying positions available Adjusts the position of the projected image
Remote Receiver Front/Rear




Limits reception of remote control signals by the selected receiver; Off turns off all receivers
Screen Type 4:3




Sets the aspect ratio to fit the image on the projection surface; not available in Content Playback mode
Screen Position Varying positions available Shifts the image position on the screen (only available if the Screen Type setting is not set to the same aspect ratio as the projector's native resolution)
High Altitude Mode On


Regulates the projector's operating temperature at altitudes above 4921 feet (1500 m)
Source Displays settings saved for each input source
Blanking Top




Hides an area of the projected image that you select (setting only displayed when Content Playback is Off)
Reset to Defaults Resets all settings for the current input source (setting only displayed when Content Playback is Off)
Reset Installation Settings Resets all settings on the Installation menu to their default values except for the following:
  • Digital Zoom
  • E-Zoom
  • Image Shift
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use