Overview of the Printing Process

This section explains the basic workflow for using your product to print on T-shirts or Digital-Transfer-Film.

Printing on a T-shirt

Preparing the Required Equipment
Prepare the equipment you need for printing.
Preparing the Printer
Turn on the printer and make sure it is functioning properly.
Creating and Sending Your Garment Design
Create the data you want to print and use the Garment Creator 2 software to send it to the printer.
Pre-treating the T-shirt
When printing on polyester or with White ink on cotton media, apply pre-treatment solution to the T-shirt before printing and make sure the pre-treatment solution is completely dry before printing. If the T-shirt is creased, use a heat press to smooth it.
Determine the Platen Height
Set the platen height for your media and operating conditions.
Loading the T-shirt (Media)
Load the T-shirt onto the platen or grip pad.
Printing
Check that the start light is on before you start printing.
Removing the T-shirt
Remove the T-shirt from the platen or grip pad.
Post-treating the T-shirt
Fix the ink to the T-shirt.

Printing on Digital-Transfer-Film

Preparing the Printer
Turn on the printer and make sure it is functioning properly.
Creating and Sending Your Design
Create the data you want to print and use the Garment Creator 2 software to send it to the printer.
Loading the Film
Load the film onto the platen or grip pad.
Printing
Check that the start light is on before you start printing.
Removing the Film
Remove the film from the platen or grip pad.
Post-processing the Film
Perform post-processing for the printed film and media to complete the printed product.
Note: The steps for post-processing can vary depending on the specific parts and devices you are using with your product. Make sure you check the instructions provided with the film and powder you are using, and consult your dealer and supplier for more information.