If the print head is moving and nothing prints, try these
solutions:
Print a nozzle check pattern and then clean the print head, if
necessary. If there are still clogged nozzles, clean the suction
cap and around the print head and then clean the print head again
and check if the clogged nozzles were cleared. If the problem
remains, contact your dealer or Epson for support.
Note: Use a
transparent sheet when you are printing a nozzle check pattern with
White ink. If you are using Color ink mode, it is difficult to see
the cleaning liquid rows in the nozzle check pattern. There is no
problem if the cleaning liquid rows are the only rows you cannot
see.
Make sure the platen height is adjusted correctly. The printer
cannot print if the platen is too far from the print head. If
Platen Gap is set to Manual, check that the spacer combination and
platen height (scale) are suitable for the type of media you are
using.