You can display information about the projector and input sources by viewing the Projector Info menu in the projector's Info menu.
The available settings depend on the current input source.
The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours.
|
Information item |
Description |
|---|---|
|
Lamp Hours |
Displays the number of hours (H) the lamp has been used in each Power Consumption mode; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon.
|
|
Source |
Displays the name of the port to which the current input source is connected. |
|
Input Signal |
Displays the input signal setting of the current input source. |
|
Resolution |
Displays the resolution of the current input source. |
|
Refresh Rate |
Displays the refresh rate of the current input source. |
|
Sync Info |
Displays information that may be needed by a service technician. |
|
Status |
Displays information about projector problems that may be needed by a service technician. |
|
Serial Number |
Displays the projector's serial number. |
|
Event ID |
Displays the Event ID number corresponding to a network problem; see the list of Event ID codes. |
