Crestron Connected Support

If you are using the Crestron Connected network monitoring and control system, you can set up your projector for use on the system. Crestron Connected lets you control and monitor your projector using a Web browser.

This feature is only available on the PowerLite 994F.

You cannot use the Message Broadcasting feature in Epson Projector Management when you use Crestron Connected.
When connected to a network by wired LAN, if you set Standby Mode to Communication On, you can control the projector even if the projector is in standby mode (when the power is off).
ECO > Standby Mode
When connected to a network by wireless LAN and A/V Output is set to Always On from A/V Settings in the Extended menu, you can control the projector even if the projector is in standby mode (when the power is off).
Extended > A/V Settings > A/V Output

For additional information on Crestron Connected, visit the Crestron Web site.

https://www.crestron.com/

To monitor devices in the system, you can use Crestron RoomView Express or Crestron Fusion provided by Crestron. You can communicate with the help desk and send emergency messages. See the following Web site for details.

http://www.crestron.com/getroomview

To monitor or control your projector and other various devices over a network, you can use Crestron XiO Cloud. You can manage multiple devices from one location. See the following Web site for details.

https://www.crestron.com/Products/Featured-Solutions/XiO-Cloud

This manual describes how to perform operations on your computer using a Web browser.