Input Signal Settings - Signal Menu

Normally the projector automatically detects and optimizes the input signal settings. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source.

To change settings for an input source, make sure the source is connected and select that source.

Setting	Options	Description
Resolution*	Auto Wide Normal	Sets the input signal resolution if not detected automatically using the Auto option.
Aspect	See the list of available aspect ratios.	Sets the aspect ratio (width-to-height ratio) for the selected input source.
Tracking*	Varying levels available	Adjusts the signal to eliminate vertical stripes in computer images.
Sync.*	Varying levels available	Adjusts the signal to eliminate fuzziness or flickering in computer images.
Position*	—	Adjusts the image location on the screen.
Auto Setup*	On Off	Automatically optimizes computer image quality (when On).
Advanced	Video Range	Sets the video range to match the setting of the device connected to the HDMI port.
	Video Signal*	Video Signal: specifies the signal type from the input sources connected to the Video ports. If interference appears or no image appears when set to Auto, select the appropriate signal according to the connected equipment.
Reset	—	Resets all adjustment values on the Signal menu to their default settings.

* This setting is only available on the PowerLite 994F.