You can adjust the resolution of the image to reproduce a clear image with an emphatic texture and material feel.
Noise Reduction and MPEG Noise Reduction are available when Image Processing is set to Fine.
Signal I/O >
Image Processing
Turn on the projector and switch to the image source you want to use.
Press the Menu button on the control panel or remote control.
Select the Image menu and press Enter.
Select Image Enhancement and press Enter.
Select Image Preset Mode and press Enter.
Select the preset option and press Enter.
Noise Reduction
MPEG Noise Reduction
Super-resolution
Auto Contrast Enhancement
Adjust each setting in the projector's Image menu individually as necessary.
To reduce flickering in images, adjust the Noise Reduction setting.
To reduce the noise or artifacts seen in MPEG video, adjust the MPEG Noise Reduction setting.
To reduce blurring appeared when projecting low resolution image, adjust the Super-resolution setting.
To create a clearer and sharper image by automatically adjusting the contrast, adjust the Auto Contrast Enhancement setting.
The settings value in the preset option are overwritten.
Press Menu or Esc to exit the menus.
You can also set the Image Enhancement setting in the projector's Image menu.