Copying Menu Settings Between Projectors (Batch Setup)

After selecting the projector's menu settings for one projector, you can use the following methods to copy the settings to other projectors, as long as they are the same model.

by using a USB flash drive
by connecting a computer and projector using a USB cable

You cannot copy any information unique to an individual projector, such as Light Source Hours or Status.

Perform batch setup before adjusting the image settings such as keystone distortion correction. Since image adjustment values are also copied to another projector, the adjustments you made before performing the batch setup are overwritten and the projected screen you adjusted may change.
Make sure Batch Setup Range is set to Limited if you do not want to copy the following settings:
- EDID in the Signal I/O menu
- Network menu settings
Management > Batch Setup Range

Caution

Epson takes no responsibility for batch setup failures and associated repair costs due to power outages, communication errors, or other problems that may cause such failures.