Settings on the Projector Control menu let you select settings for controlling the projector over a network.
|
Setting |
Options |
Description |
|---|---|---|
|
Command Communication |
Protected Compatible |
Selects the authentication method for command communication. When using Command Communication, set the Monitor Password or the Web Control Password.
Set to Compatible when performing plain text authentication using the Monitor Password (up to 16 alphanumeric characters long). Select Compatible when monitoring projectors with a switcher and a system controller. |
|
Web API Settings |
Web API |
Select On to enable the Web API function. |
|
|
Authentication |
Selects the security for your projector to use during Web API communications. Open: Security is not set. Digest: Communication is performed using API authentication (Digest authentication). See the online Notices for details. |
|
Basic Control |
On Off |
Set to On to monitor and control the projector using Basic Control in Epson Web Control. This setting is only displayed when Content Playback is set to Off in the projector's Operation menu. |
|
Remote Password |
Up to 8 alphanumeric characters (do not use * : spaces) |
Enter a password to access the projector using Basic Control in Epson Web Control. (The user name is EPSONREMOTE. No password is set by default.) |
|
PJLink |
On Off |
Set to On to enable the PJLink notification function. |
|
PJLink Password |
Up to 32 alphanumeric characters (do not use spaces and any symbols other than @) |
Enter a password for using the PJLink protocol for projector control. You must set the PJLink Password when using the PJLink function for the first time. |
|
Notified IP Address |
Various IP addresses |
Enter the IP address to receive the projector's operating status when the PJLink notification function is enabled. Enter the addresses using 0 to 255 for each address field. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). |
|
AMX Device Discovery |
On Off |
Set to On when you want to allow the projector to be detected by AMX Device Discovery. |
|
Crestron Connected |
On Off |
Set to On only when monitoring or controlling the projector over the network using Crestron Connected. |
|
Password |
Up to 20 alphanumeric characters |
Enter a password to enable Crestron Connected. No password is set by default. |
|
Crestron XiO Cloud |
On Off |
Set to On to monitor or control your projector and other devices over the network using the Crestron XiO Cloud service. |
|
Control4 SDDP |
On Off |
Set to On to allow device information to be acquired using Control4 Simple Device Discovery Protocol (SDDP). |
|
Secure HTTP |
On Off |
To strengthen security, communication between the projector and computer in Web control is encrypted. When setting security with Web control, it is recommended to set this to On. |
|
Web Server Certificate |
— |
Imports the Web server certificate for secure HTTP. |
