If the projected image contains electronic interference (noise) or static, try the following solutions:
Check the cables connecting your computer or video source to the projector. They should be:
Separated from the power cord to prevent interference
Securely connected at both ends
Not connected to an extension cable
Adjust the Noise Reduction and MPEG Noise Reduction settings in the projector's Image menu.
Image >
Image Enhancement
>
Noise Reduction
Image >
Image Enhancement
>
MPEG Noise Reduction
Select a computer video resolution and refresh rate that are compatible with the projector.
If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting in the projector's Image menu to improve image quality.
If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.
Make sure you selected the correct EDID setting in the projector's Signal I/O menu, if available for your image source.
Change the HDMI IN EQ Level setting in the projector's Signal I/O menu.
If you connected an A/V system that does not support eARC/ARC to the HDMI2 (eARC/ARC) port, the image may be distorted.