After selecting the projector's menu settings for one projector, you can use the following methods to copy the settings to other projectors, as long as they are the same model.
by using a USB flash drive (Available only for models that have a USB-A port.)
by connecting a computer and projector using a USB cable
Menu settings such as the following are not copied to the other projector.
Network menu settings (except for the Notifications menu and the Others menu)
Lamp Hours and Status from the Projector Info menu
Perform batch setup before adjusting the image settings such as keystone distortion correction. Since image adjustment values are also copied to another projector, the adjustments you made before performing the batch setup are overwritten and the projected screen you adjusted may change.
When copying the menu settings from one projector to another, the user's logo is also copied. Do not register the information that you do not want to share between multiple projectors as a user's logo.
Make sure Batch Setup Range is set to Limited if you do not want to copy the following settings:
Password Protection settings
Network menu settings (except for the Notifications menu and the Others menu)
Extended >
Operation >
Advanced >
Batch Setup Range
CautionEpson takes no responsibility for batch setup failures and associated repair costs due to power outages, communication errors, or other problems that may cause such failures.
Related Links