Using Basic Projector Features
Using the Projector on a Network
Network administrators can install SNMP (Simple Network Management Protocol) software on network computers so they can monitor projectors. If your network uses this software, you can set up the projector for SNMP monitoring.
Press the Menu button, select the Network menu, and press Enter.
Select Network Configuration and press Enter.
Select the Notifications menu and press Enter.
Set the SNMP setting to On.
Enter the SNMP Community Name up to 32 alphanumeric characters long.
Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field.
Do not use these addresses: 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). This projector supports SNMP agent version 1 (SNMPv1).
When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
Related Links