You can create a horizontally wide screen image projected from two projectors using the optional external camera.
This function is only available when the optional external camera is installed, and the projectors are connected with a distributor.
Connect two projectors using a LAN cable.
Make sure the DHCP setting is turned on in the projector's Network menu for two projectors.
Wait for 1 minute after assigning an IP address automatically.
Select Multi-Projection > Camera Correction Assist > Simple Blending, and press Enter. Select Yes if necessary.
Select the Location Setup setting and specify the position of the primary projector from A1, B1, or C1.
Select the image aspect in the Whole Screen Aspect setting for the merged wide image.
You can set the following aspects using the Whole Screen Aspect menu.
Selectable items vary depending on the screen type setting.
21:9 (EDID 3440x1440)
21:9 (EDID 2560x1080)
16:6 (EDID 2880x1080)
16:6 (EDID 1920x720)
3:1 (EDID 3240x1080)
32:10 (EDID 3456x1080)
32:9 (EDID 3200x900)
Perform Start Auto Adjustment. If the projection position cannot be adjusted fully using lens shift dials, move the projectors so that the green pattern and the magenta pattern overlap and become white.
After auto adjustment is complete, perform Correct Shape following the instructions on the screen.
Perform Screen Matching to adjust the brightness and tint of the images.