Settings on the Wireless LAN menu let you select the wireless LAN settings.
Turn on the Wireless LAN Power setting in the projector's Network menu.
If you did not install an optional wireless LAN module, turn off the Simple AP setting to enable you to select wireless LAN settings.
If you have installed the optional wireless LAN module, turn on the Simple AP setting to enable you to select wireless LAN settings.
When connecting to a wireless network, it is strongly recommended that you set security. When setting security, follow the instructions from the administrator of the network system you want to connect to.
WPA is an encryption standard that improves the security for wireless networks. The projector supports AES encryption methods.
WPA2/WPA3-EAP and WPA3-EAP do not support WPA3 192-bit security.
|
Setting |
Options |
Description |
|---|---|---|
|
Search Access Point |
To Search View |
Search for available wireless network access points. Depending on the access point settings, they may not be displayed in the list. |
|
SSID |
Up to 32 alphanumeric characters |
Enter the SSID (network name) of the wireless LAN system the projector is connecting to. |
|
Security |
WPA2/WPA3-PSK |
Connects in WPA2/WPA3 personal mode. Encryption method is selected automatically according to the access point settings. Set a passphrase which is the same for the access point. |
|
|
WPA2/WPA3-EAP |
Connects in WPA2/WPA3 enterprise mode. Encryption method is selected automatically according to the access point settings. |
|
|
WPA3-PSK |
Connects in WPA3 personal mode. Communication is performed using WPA3 security. Uses AES method for encryption. When establishing a connection from a computer to the projector, enter the value set in the passphrase. |
|
|
WPA3-EAP |
Connects in WPA3 enterprise mode. Encryption method is selected automatically according to the access point settings. |
|
|
Open |
Security is not set. |
|
Passphrase (For WPA2/WPA3-PSK and WPA3-PSK security) |
Various passphrases from 8 to 63 characters |
Enter the pre-shared passphrase used on the network. When the passphrase is entered and the Enter button is pressed, the value is set and displayed as an asterisk (*). We recommend changing the passphrase periodically for security. If the network settings are initialized, it returns to the initial passphrase. |
|
EAP Type (For WPA2/WPA3-EAP and WPA3-EAP security) |
PEAP |
Authentication protocol widely used in Windows Server. |
|
EAP-TLS |
Authentication protocol widely used to use a client certificate. |
|
|
User name |
Up to 64 alphanumeric characters |
Enter a user name for the network. To include a domain name, add it before a backslash and the user name (domain\username). When importing a client certificate, the name the certificate was issued to is automatically set. |
|
Password |
Up to 64 alphanumeric characters |
Enter a password for authentication. After you enter the password and select Set, the password is displayed as an asterisk (*). Setting is only displayed when EAP Type is set to PEAP. |
|
Client Certificate |
— |
Imports the client certificate. Setting is only displayed when EAP Type is set to EAP-TLS. |
|
CA certificate |
— |
Imports the CA certificate. |
|
RADIUS Server Name |
Up to 64 alphanumeric characters |
Enter the server name to verify. |
|
IP Settings |
DHCP IP Address Subnet Mask Gateway Address |
Set DHCP to On if your network assigns addresses automatically; set to Off to manually enter the network's IP Address, Subnet Mask, and Gateway Address using 0 to 255 for each address field. Do not use these addresses: 0.0.0.0, 127.x.x.x, 192.0.2.x, 192.168.48.x, 192.168.88.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255) for IP Address, 255.255.255.255 or 0.0.0.0 through 254.255.255.255 for Subnet Mask, and 0.0.0.0, 127.x.x.x or 224.0.0.0 through 255.255.255.255 for Gateway Address. |
|
DNS Server 1 DNS Server 2 |
Various IP addresses |
Enter the IP address for the DNS server, using 0 to 255 for each address field. The DNS server resolves the host name. Do not use the following IP addresses: 127.x.x.x (where x is a number from 0 to 255). When these settings are not set and remain as 0.0.0.0, DNS server information is acquired using DHCP. After acquiring the information, the values remain as 0.0.0.0. |
|
IPv6 |
On Off |
Set to On if you want to connect the projector to the network using IPv6. IPv6 is supported to monitor and control the projector over a network using Epson Web Control and PJLink. |
|
Auto Configuration |
On Off |
(This setting may be unavailable depending on your projector model.) Set to On to assign addresses automatically according to the Router Advertisement. |
|
Use Temporary Address |
On Off |
(This setting may be unavailable depending on your projector model.) Set to On if you want to use a temporary IPv6 address. |
|
IP Address Display |
On Off |
Set to On to display the IP address on the network information screen and Home screen. |
Related Links