Contents

Solutions When "No Signal" Message Appears

If the No Signal message appears, try the following solutions:

  • Press the Source Search button and wait a few seconds for an image to appear.

  • Turn on the connected computer or video source, and press play to begin your presentation, if necessary.

  • Check that all cables required for projection are securely connected.

  • If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.

  • If necessary, turn off the projector and the connected computer or video source, and then turn them back on.

  • If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.