You can set up the projector to send you an e-mail alert over the network if there is a problem with the projector.
If you set the Standby Mode setting to Normal in the projector's Operation menu, you can receive the e-mail alerts even if the projector is in standby mode (when the power is off).
Press the Menu button, select the Network menu, and press Enter.
Select Network Settings and press Enter.
Select the Mail Notification menu and press Enter.
Set the Mail Notification setting to On.
Enter the IP address for the SMTP Server option.
Do not use "127.x.x.x" (where x is a number from 0 to 255) for the SMTP Server.
Select a type of Authentication of SMTP server.
Select a number for the SMTP server Port Number, from 1 to 65535 (default is 25).
Enter a User Name for the SMTP server.
Enter a Password for the SMTP server authentication.
Enter the e-mail address to be indicated as the sender in From.
Choose an address field, enter the e-mail address, and select the alerts you want to receive. Repeat for up to three addresses.
Your e-mail address can be up to 64 alphanumeric characters long.
When you finish selecting settings, go back to the Network Settings screen, select Set, and follow the on-screen instructions to save your settings and exit the menus.
If a critical problem causes a projector to shut down, you may not receive an e-mail alert.