Projector Feature Settings - Operation Menu

Settings on the Operation menu let you customize various projector features.

Setting	Options	Description
Standby Mode	ECO Wired LAN Communication Normal	Sets the operation status when the projector is in standby mode. ECO: disables network communication and reduces standby power to the minimum. Wired LAN Communication: enables wired network communication even when no images are being projected and reduces standby power. Normal: enables network communication and USB power supply even when no images are being projected. Setting is only displayed in the following cases: Auto Power On is set to Off Quick Startup is set to Off
Standby Audio Output	On Off	Sets whether or not to output audio when no image is being projected. Setting is only displayed in the following cases: Standby Mode is set to Normal Auto Power On is set to Off Quick Startup is set to Off
Auto Power ON	Off HDMI1 HDBaseT	Sets the image source from which you want to automatically start projection. When the projector detects the input signal from the selected image source, it projects automatically in standby mode.
Quick Startup	Off 60min. 90min.	Sets the time period for Quick Startup mode. The projector enters this mode when you turn it off. You can start projecting in approximately 5 seconds by pressing the power button. However, it may take longer to become ready for use in the following situations: When projecting from the projector's USB port When projecting using the Miracast features Setting is only displayed in the following cases: Auto Power On is set to Off.
HDBaseT	Control Communications	Enables or disables communication from the Ethernet and serial ports on the HDBaseT transmitter or switcher; turning on this setting disables the projector's LAN and RS-232C ports. Setting is only displayed when Extron XTP is set to Off.
HDBaseT	Extron XTP	Set to On when you connect an Extron XTP transmitter or switcher to the HDBaseT ports. See the following Extron Web site for more details on the XTP system. http://www.extron.com/
Light Source Brightness Control	Maintain Brightness	Set to On to maintain a constant brightness for the light source.
Light Source Brightness Control	Maintain Brightness Level	Select the brightness level you want to maintain constantly. Setting is only displayed when Maintain Brightness is set to On.
	Light Source Mode	See the Multi-Projection menu table for details on the Light Source Mode settings. Setting is only displayed when Maintain Brightness is set to Off.
	Brightness Level	Select the brightness level you want when Custom is set to Light Source Mode. Setting is only displayed when Maintain Brightness is set to Off.
Auto Source Search	On Off	Set to On to detect the input signal automatically and project images when there is no input signal. This function is disabled when you turn on the projector in the Quick Startup mode. Setting is only displayed when Content Playback is set to Off.
Startup Source	Various input sources available	Select the image source you want to project when the projector is turned on in Content Playback mode.
Sleep Mode	On Off	Set to On to automatically turns off the projector after an interval of inactivity.
Sleep Mode Timer	1 to 30 minutes	Sets the interval for Sleep Mode.
A/V Mute Settings	A/V Mute Timer	Turns off the projector automatically if A/V Mute is enabled and 30 minutes of inactivity has passed.
A/V Mute Settings	Button to Release A/V Mute	Select A/V Mute if you want to use only the A/V Mute button to turn off A/V Mute, or select Any Button to use any button to turn it off.
Operation Settings	Direct Power On	Set to On to turn on the projector by plugging it in without pressing the power button.
	Indicators	Set to Off to turn off the indicator lights on the projector except when an error or warning occurs.
	Beep	Controls the beep that sounds when you turn the projector on or off.
	Log Save Destination	Sets the location in which to save error and operation log files. Setting is only displayed when Content Playback is set to Off.
	Batch Setup Range	Select All to copy all of the projector menu settings using the batch setup feature. Select Limited, if you do not want to copy the following settings: Password Protection settings EDID in the Signal I/O menu Network menu settings
Content Playback	On Off	Set to On to play back a playlist.
Overlay Effect	Overlay Effect Shape Filter Color Filter Lightness	Adds color and shape effects to the projected image. Setting is only displayed in the following cases: Edge Blending is set to Off in the projector's Multi-Projection menu. In Content Playback mode, the playlist can be played and no writable error has occurred.
USB Viewer	—	Selects and plays back a playlist saved on the USB flash drive.
Reset Operation Settings	—	Resets all adjustment values on the Operation menu to their default settings.