Contents

Changing the Image Aspect Ratio

You can change the aspect ratio of the displayed image.

  • Set the Screen Type setting in the projector's Installation menu before changing the aspect ratio.

  • Available only when using one of the following input sources:

    • HDMI

    • HDBaseT

  • Available only when the Scale setting is turned off or the Scale Mode setting is set to Full Display.

    Image > Scale > Scale Mode

  1. Turn on the projector and switch to the image source you want to use.

  2. Press the Menu button on the control panel or remote control.

  3. Select the Image menu and press Enter.

  4. Select Aspect and press Enter.

  5. Select the aspect ratio for your input signal.

  6. Press Menu or Esc to exit the menus.

  • The available aspect ratio setting varies depending on the input signal.

  • If there are margins between the edge of the image and the projected screen frame, you can adjust the position of the image using the Screen Position setting in the projector's Installation menu.

    Installation > Screen Position

Related Links