Settings on the Projector Control menu let you select settings for controlling the projector over a network.
Setting |
Options |
Description |
---|---|---|
Command Communication |
Protected Compatible |
Selects the authentication method for command communication. Set to Protected when performing a digest authentication using Web Control Password. You need to install the latest version of the Epson Projector Management software. Set to Compatible when performing plain text authentication using the Monitor Password. Select Compatible when monitoring projectors with a switcher and a system controller or using Epson Projector Management ver. 5.30 or earlier. |
Monitor Password |
Up to 16 alphanumeric characters (do not use spaces or any symbols other than @) |
Enter a password for monitoring projectors with a switcher and a system controller, or using Epson Projector Management ver. 5.30 or earlier. Make sure that the Monitor Password matches the password set for the switcher or the system controller. |
Web API Settings |
Web API |
Select On to enable the Web API function. |
Authentication |
Select the authentication method for Web API communication. Open: Security is not set. Digest: Communication is performed using API authentication (Digest authentication). See the Web API Specifications for Projectors for details. |
|
Basic Control |
On Off |
Set to On to monitor and control the projector using Basic Control in Epson Web Control. This setting is only displayed when Content Playback is set to Off in the projector's Operation menu. |
Remote Password |
Up to 32 alphanumeric characters (do not use * : spaces) |
Enter a password to access the projector using Basic Control in Epson Web Control. (The user name is EPSONREMOTE. No password is set by default.) |
PJLink |
On Off |
Set to On to enable the PJLink notification function. |
PJLink Password |
Up to 32 alphanumeric characters (do not use spaces and any symbols) |
Enter a password for using the PJLink protocol for projector control. |
Notified IP Address |
Various IP addresses |
Enter the IP address to receive the projector's operating status when the PJLink notification function is enabled. Enter the addresses using 0 to 255 for each address field. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). |
SNMP |
SNMPv1/v2c |
Set to On to monitor the projector using SNMPv1/v2c. To monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a network administrator. |
Trap IP Address 1 Trap IP Address 2 |
Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Do not use these addresses: 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). |
|
Community Name |
Enter the SNMP community name. You can use up to 32 alphanumeric characters (do not use spaces and any symbols). |
|
SNMPv3 |
Set to On to monitor the projector using SNMPv3. To monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a network administrator. |
|
User name |
Enter the SNMP user name. You can use up to 32 alphanumeric characters. |
|
Trap IP Address 1 Trap IP Address 2 |
Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Do not use these addresses: 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). |
|
Authentication |
Selects the type of SNMPv3 authentication. |
|
Authentication Password |
This password is used for the SNMPv3 authentication. This must be set to use the feature securely. You can use up to 32 alphanumeric characters. |
|
Encryption Type |
Selects the type of SNMPv3 encryption. |
|
Encryption Password |
This password is used for the SNMPv3 encryption. This must be set to use the feature securely. You can use up to 32 alphanumeric characters. |
|
AMX Device Discovery |
On Off |
Set to On when you want to allow the projector to be detected by AMX Device Discovery. |
Crestron Connected |
On Off |
Set to On only when monitoring or controlling the projector over the network using Crestron Connected. Enabling Crestron Connected disables the Epson Message Broadcasting feature in the Epson Projector Management software. |
Password |
Up to 20 alphanumeric characters |
Enter a password to enable Crestron Connected. No password is set by default. |
Crestron XiO Cloud |
On Off |
Set to On to monitor or control your projector and other devices over the network using the Crestron XiO Cloud service. |
Control4 SDDP |
On Off |
Set to On to allow device information to be acquired using Control4 Simple Device Discovery Protocol (SDDP). |
Secure HTTP |
On Off |
To strengthen security, communication between the projector and computer in Web control is encrypted. When setting security with Web control, it is recommended to set this to On. |
Web Server Certificate |
— |
Imports the Web server certificate for secure HTTP. |