Contents

Using a USB Key to Connect a Windows Computer

You can set up your USB flash drive as a USB key to quickly connect the projector to a wireless LAN supported Windows computer. After creating the USB key, you can quickly project images from the network projector.

  1. Set up the USB key using USB Key Setup Tool of the Epson iProjection (Windows/Mac) software.

    See the Epson iProjection Operation Guide (Windows/Mac) for instructions.

  2. Make sure the wireless LAN module is installed or built into your projector.

  3. Turn on the projector.

  4. Press the Wireless button on the remote control.

    You see the network information screen. Verify that an SSID and IP address are displayed.

  5. Remove the wireless LAN module from the projector's USB-A port (if installed) and insert the USB key into the same port.

    You see a projected message that the network information update is complete.

  6. Remove the USB key.

    If your projector needs the wireless LAN module, reinsert the wireless LAN module into the projector.

  7. Connect the USB key to a USB port on your computer.

  8. Follow the on-screen instructions to install the necessary application.

    • If the Windows Firewall message is displayed, click Yes to disable the firewall.

    • You need administrator authority to install the software.

    • If it is not installed automatically, double-click MPPLaunch.exe in the USB key.

    After a few minutes, your computer image is displayed by the projector.

  9. When you have finished projecting wirelessly, select the Safely Remove Hardware option in the Windows taskbar, and then remove the USB key from your computer.

    You may need to restart your computer to reactivate your wireless LAN connection.