Contents

Turning Off the Projector

Turn off the projector after use.

  • Turn off this product when it is not in use to prolong the life of the projector. Light source life varies depending on the mode selected, environmental conditions, and usage. Brightness decreases over time.

  • If the Light Source Calibration setting is set to Run Periodically in the projector's Management menu, light source calibration starts automatically if you turn off the projector and the following conditions are present:

    • 100 hours have passed since the last light source calibration

    • You have used the projector continuously for more than 20 minutes

  • Since the projector supports the direct shutdown feature, it can be turned off directly using the breaker.

  1. Press the power button on the control panel or remote control.

    The projector displays a shutdown confirmation screen.

  2. Press the power button again. (To leave it on, press any other button.)

    The projector beeps twice, the light source turns off, and the status indicator turns off.

  3. To transport or store the projector, make sure the power indicator is blue (but not flashing) and the status indicator is off, then unplug the power cord.

  4. Attach the lens cover.