Settings on the Installation menu help you set up your projector in your installation environment.
|
Setting |
Options |
Description |
|---|---|---|
|
Test Pattern |
— |
Displays a test pattern to assist in focusing and zooming the image and correcting image shape (press the Esc button to cancel pattern display). |
|
Projection |
Front Rear Front/Ceiling Rear/Ceiling |
Sets the way the projector faces the screen so the image is oriented correctly. |
|
Inv Direction Button |
On Off |
When suspending the projector from a ceiling, set to On to invert the operation direction of the control panel arrow buttons. |
|
Geometry Correction |
H/V-Keystone |
Manually corrects horizontal and vertical sides. V-Keystone: lets you manually correct vertical side. V-Balance: lets you manually correct vertical balance. H-Keystone: lets you manually correct horizontal side. H-Balance: lets you manually correct horizontal balance. |
|
|
Quick Corner |
Corrects image shape and alignment using an on-screen display. |
|
|
Point Correction Mode |
Divides the projected image into a grid and corrects the distortion by moving the selected point of intersection from side to side and up and down. |
|
|
Curved Surface Mode |
Corrects the corners and sides of an image projected on a curved surface. |
|
|
Corner Wall Mode |
Corrects the corners and sides of an image projected on a curved surface with right angles. |
|
|
Off |
Temporarily cancels the geometry correction. |
|
|
Memory |
Save customized sets of settings to memory.
|
|
Remote Receiver |
Front/Rear Front Rear Off |
Limits reception of remote control signals by the selected receiver; Off turns off all receivers. |
|
Screen Type |
4:3 16:6 16:9 16:10 21:9 |
Sets the aspect ratio of the screen to fit the image into the projection area. Setting is only displayed when Content Playback is set to Off in the projector's Operation menu. |
|
Screen Position |
Various positions available |
Shifts the image position horizontally and vertically. This feature is not available if you set the Screen Type setting to the same aspect ratio as the projector resolution. |
|
High Altitude Mode |
On Off |
Regulates the projector’s operating temperature at altitudes above 4,921 feet (1,500 m). |
|
Blanking |
Top Bottom Left Right |
Hides an area of the projected image that you select using the arrow buttons. Setting is only displayed when Content Playback is set to Off in the projector's Operation menu. |
|
Reset Installation Settings |
— |
Resets all adjustment values on the Installation menu to their default settings. |